
NPM-VF

Features
The NPM-VF is equipped with a double portal. The SMD and THT components are placed by one placement head per portal. A wide variety of vacuum pipettes and grippers are available. The pick and place machine can be used in single or dual lane mode.
The NPM-VF reaches a speed of up to 4,500cph and can process component sizes from 5x5mm up to 130x35mm and 60mm height.
Active cutting and clinching tools are integrated which detach THT components from the radial and axial feeders. Clinching directions as well as pin lengths per THT component can be defined via the assembly program.
Beside the radial and axial feeders, the NPM-VF can be equipped with all common standard feeder systems for SMD components.
The flexible NPM-VF is an ideal machine for cycle-optimized production, especially for companies that must process both types of components due to the increased demand from power electronics for THT assemblies.
This efficient pick and place machine contributes to reduce manpower requirements and to consistent production with high productivity, flexibility and high-quality pick and place results.
Specifications
Model ID | NPM-VF | |
---|---|---|
Standard conveyor | Anvil conveyor (Option) | |
PCB dimensions (mm) | L 50 x W 50 ~ L 510 x W 460 | L 50 x W 50 ~ L 460 x W 400 |
Max. PCB mass *1 | Up to 3kg | |
PCB thickness | 0.3 ~ 8 mm | |
PCB flow | Left ← Right / Left → Right (Flow direction is selectable) | |
Insertion direction | 360º (± 180º )*1 degree unit | |
Insertion push force | Up to 100 N | |
PCB Exchange time | 4.5 s | 5.5 s |
Clinch specifications | - |
Clinch angle : 60 degrees outward clinch Clinch pitch : 2.5 to 40 mm Lead bend angle : 10 ~ 40º Lead diameter : φ 0.4 mm ~ φ 1.0 mm (soft copper) φ 0.4 mm ~ φ 0.8 mm (hard copper / CP wire) |
Applicable components |
Max. dimensions : L 130 mm × W 35 mm × H 60 mm • L 150 mm × W 38 mm × H 29 mm Max. component mass : 200g |
|
Electric source | 3-phase AC 200, 220, 380, 400, 420, 480 V, 2.7 kVA | |
Pneumatic source | 0.5 ~ 0.8 MPa, 200 L /min (A.N.R.) | |
Dimensions (mm) |
W 1 866 x D 2 332 x H 1 554 (Main body only) W 2 166 x D 2 332 x H 1 554 (When downstream extension conveyor is connected) Note: Excluding the monitor, signal tower and ceiling fan cover. |
|
Mass | 2 590 kg (Only for main body : This differs depending on the option configuration) |
Head Configurations | ||
---|---|---|
3-station head | Body chuck + Nozzle + Nozzle | Tact : Max. 0.65 s / component *2, 3, 6 |
Body chuck + Nozzle + Swing nozzle | ||
Body chuck + Nozzle + Lead chuck | ||
Body chuck + Swing nozzle + Lead chuck | ||
2-station head | Body chuck + Body chuck | Tact : Max. 0.9 s / component *2, 3 |
Component Supply | ||||||
---|---|---|---|---|---|---|
Stick | S |
Max. component dimension : W 20 x L 80 x H 20 mm Max. stick width : 24 mm Max. component mass : 2 kg in total (including stick mass) |
||||
L |
Max. component dimension : W 60 x L 80 x H 45 mm Max. stick width : 64 mm Max. component mass : 2 kg in total (including stick mass) |
|||||
Radial tape |
Max. body dimension : Max. φ 20 x H 30 mm Lead pitch : 2.5 / 5.0 / 7.5 / 10.0 mm |
|||||
Tray |
Max. tray dimension : L 230 x W 335 x D 69 mm Max. pallets per feeder : Max. mass : 20 kg (magazine + pallet + tray + components) |
|||||
Bulk *4 | Customized spec | |||||
Machine Configuration | Max. number of products to be loaded | Stick S | Stick L | Radial | Tray | |
Front | 30-slot fixed supply unit *5 | 15 | 7 | 10 | - | |
Rear | 30-slot fixed supply unit | 15 | 7 | 10 | - | |
13-slot fixed supply unit + single tray feeder | 6 | 3 | 4 | 20 | ||
Twin tray feeder | - | - | - | 40 | ||
Single tray feeder + Bowl feeder x 2 *4 | - | - | - | 20 | ||
Bowl feeder x 4 *4 | - | - | - | - |
System | |
---|---|
Programming and Software |
NPM-DGS・AM-LNB・LNB、Option : PanaCIM、iLNB Note:Max. 3 NPM-VF can be connected to AM-LNB Up to 15 machines of the NPM series (including NPM-VF) or the SP series can be connected to LNB. |
Optional functions | Component verification, Traceability, Automatic changeover, Host communication, iLNB line control including other company's machine |
SMT components *7 | |||||||
---|---|---|---|---|---|---|---|
Applicable components | Min. dimensions: L 5 mm × W 5 mm or larger (For tape, embossed tape of 12 mm or larger) | ||||||
Placement specs | Head: Nozzle only Placement accuracy: QFP ±0.05 mm (Cpk ≧ 1) Max. tact time: 3000 cph (per head) | ||||||
Supply unit (embossed tape) | Tape feeder width | 12/16 mm | 24/32 mm | 44/56 mm | 72 mm | 88 mm | 104 mm |
30-slot supply unit | 30 | 15 | 10 | 7 | 6 | 5 | |
13-slot supply unit | 13 | 6 | 4 | 3 | 2 | 2 |
Notes
- PCB mass after insertion (including carrier mass)
- Except when anvil is attached
- During 2-head operation (configured similar to 2-beam specs) under optimum conditions
- Custom specs…Connection via the host feeder
- For front side configuration, select between 30 stations fixed supply unit (Std.) or feeder cart (Option)
- For Body chuck + Nozzle + Nozzle
- Standard conveyor specs
*Placement tact time may differ slightly depending on conditions. *Please refer to the specification booklet for details.