
NPM-DX

Features
The NPM-DX provides a greater line throughput, better quality and lower production cost featuring an autonomous line control, which guaranties a stable operation based on automatic functionality. This functionality in combination with the machine set up offers a labor-saving production with improved utilization.
In combination with the Panasonic software environment and embedded into an Industry 4.0 philosophy, the user can expect a modern shop floor management system including various remote operation options, feeder setup navigation, component supply navigation etc.
In total, the NPM-DX reduces downtimes and increase the line throughput.
With 92 400 cph and a feeder capacity for up to 136 reels, the NPM-DX is the ideal solution to meet the expectation of an evolving electronics assembly industry.
The NPM-DX can process PCB sizes of up to 510 x 590 mm and place large connectors (up to 150 x 25mm) and other components (up to 120 x 90mm).
This and other features make the NPM-DX the best solution for high volume-mix manufacturing.

- 92 400 cph and feeding with up to 136 reels
- Ready for line automatization
- Available APC system
- Automatic recovery options
- Remote operation option
- Lowest total cost of ownership (TCO) with maintenance services
- Advanced feeder setup and component supply navigation
- Integrated floor management
Specifications
Model ID | NPM-DX |
---|---|
PCB dimensions (mm)
*When the long spec. conveyor is selected |
Single-lane mode: L 50 × W 50 ~ L 510 × W 590 |
Dual-lane mode: L 50 × W 50 ~ L 510 × W 300 | |
PCB exchange time
*When the short spec. conveyor is selected |
2.1 s ( L 275 mm or less); 4.8 s ( L 275 mm or over to L 460 mm or less) *May differ depending on PCB specifications. |
Electric source | 3-phase AC 200, 220, 380, 400, 420, 480 V 5.0 kVA |
Pneumatic source *1 | Min.0.5 MPa、200 L /min (A.N.R.) |
Dimensions (mm) | W 1 665 *2 × D 2 570 *3 × H 1 444 *4 |
Mass | 3 600 kg (Only for main body: This differs depending on the option configuration.) |
Placement head | Lightweight 16-nozzle head V2 (Per head) | Lightweight 8-nozzle head (Per head) | 4-nozzle head (Per head) | |
---|---|---|---|---|
Max. speed |
46 200 cph (0.078 s/ chip) |
24 000 cph (0.150 s/ chip) |
8 500 cph (0.424 s/ chip) 8 000 cph (0.450 s/ QFP) |
|
Placement accuracy (Cpk≧1) | ±25 μm/Square chip | ±25 μm/ Square chip; ±40 μm/QFP □12 mm Under; ±25 μm/QFP □12 mm to □32 mm | ±20 μm/ QFP | |
Component dimensions (mm) | 0201 component *5*6 / 03015 component *5; 0402 component *5 to L 6 x W 6 x T 3 | 0402 component *5 ~L 45 x W 45 or L 100 x W 40 x T 12 | 0603 chip ~ L 120 x W 90 or L 150 x W 25 x T 30 | |
Component supply | Taping | Tape: 4 / 8 / 12 / 16 / 24 / 32 / 44 / 56 mm | Tape:4 ~56 /72 / 88 / 104 mm | |
4, 8 mm tape:Max. 136 | ||||
Stick | Max. 32 (Single stick feeder) |
Notes:
- Only for main body
- 2 265 mm in width if extension conveyors (300 mm) are placed on both sides.
- Dimension D including feeder cart
- Excluding the monitor, signal tower and ceiling fan cover.
- 0201/03015/0402 component requires a specific nozzle/tape feeder.
- 0201 component placement is optional. (Under conditions specified by Panasonic)
* Placement tact time and accuracy values may differ slightly depending on conditions.
* Please refer to the specification booklet for details.